Erayco Truck Tie Downs Anchors
The Erayco Truck Tie Downs Anchor is a useful tool for securing cargo to your truck. Its retractable design makes it easy to conceal when not in use. Its stainless steel bolts have a 1,000-pound load capacity. These anchors can be installed in the walls of your vehicle and provide additional cargo tie down points.
Safe working load limit
There are several factors to consider when choosing the correct securement system for your cargo. These factors include the working load limit and break strength of the system. The break strength refers to the point at which the load-bearing equipment is no longer able to bear the weight. It is measured in pounds or kilograms. The working load limit must be greater than or equal to the aggregate weight of the cargo being secured.
When selecting the appropriate tie down, the working load limit is the weight that it can support without failing. This limit is often indicated on the webbing. Typically, the working load limit tag is sewn into the webbing. This tag tells you the rated load for the specific tie down strap. For example, a tie down with a working load limit of 3,333 pounds may have a break strength of 10,000 pounds.
The new regulations require that all tiedowns be properly secured to prevent loosening or opening. They must also be located inboard of the rub rails. In addition, they must be protected against abrasion, cutting, and crushing. These guidelines also require that the tiedowns and the vehicle be in proper condition to prevent a load loss.
A tie down assembly consists of multiple parts, each with varying breaking strengths. The ratchet consists of one part, while the webbing consists of two parts. These three parts work together to secure the cargo in the most secure way possible. When using ratchet straps, the working load limit is 1/3 of the breaking strength.
Easy to install
If you're a responsible pickup truck driver, you know the importance of tying down your truck. These tie-downs can prevent damage to your cargo and prevent injuries to other drivers and passengers. Luckily, they are easy to install and readily available.
A high-strength steel construction makes ERAYCO D Ring tie downs exceptionally durable, able to withstand up to 1,200 pounds per ring. They're easy to install on any surface, and are packaged with mounting brackets. You can install them with bolts or nuts to secure your cargo to the truck.
When properly installed, truck tie downs have six anchor points, distributing the load's working load over a wider area. This reduces strain on individual anchors and increases reliability. For the most efficient use of truck tie downs, use one with a rated capacity equal to or higher than your load's weight.
If you're looking for a quick way to add tie down points to your truck or trailer, Stud Ring Tie Downs are the perfect solution. Simply drill two holes for each tie down ring, then install the mounting plate by bolting it in place. Once installed, snap in the spring-loaded tie down ring. This type of tie-down can be mounted almost anywhere you have enough room to tighten the stud ring anchor bolts. Each package comes with four stud ring tie down anchors and all the hardware needed to install them.
In addition to helping you secure your cargo, these anchor points also make loading your truck easier. They are rated to withstand up to 1,000 pounds of cargo, which is important for ensuring a safe journey. The Federal Motor Carrier Safety Administration provides guidelines for how many tie downs should be installed on trucks. Ideally, rated capacities for tie downs should be one and a half times the weight of the cargo.
Buying cheap truck tie downs may save you a few dollars, but they may not secure your cargo or minimize truck damage. It's important to choose the right tie downs for your specific truck model because cheap tie-downs are typically mass-produced and don't work well. Also, you need to choose the correct size for your truck, as inexpensive tie downs may not fit the dimensions of your truck.
Most pickup truck drivers are careless when it comes to hauling loads, so you need to do your part to protect your cargo. If you fail to install truck tie downs, you risk damaging your cargo, injuring other drivers, and risking your passengers.
If you're in the market for a new truck tie-down system, you may be wondering how much Erayco truck tie-down anchors cost. Erayco offers a wide variety of options and prices, and you can browse their options on Amazon. These tie-down systems are made from stainless steel and can safely hold up to 1,000 pounds of load. They are also easy to install on the truck bed.
Truck tie down anchors are essential for securing your load. They prevent your payload from falling off the back of your truck and injuring other motorists. Many pickup trucks travel the highway with large payloads. These vehicles should have Bull Ring tie-downs installed in their trucks so that their cargo remains in the bed of the truck.
Many pickup truck drivers are apathetic when it comes to using truck tie-downs, opting for a "good enough" approach that doesn't provide adequate safety. However, truck tie-downs are inexpensive, easy to install, and widely available. This makes them a great choice for securing cargo in the back of pickup trucks.
Tie down anchors are important to the safety of your cargo and your truck. They help create a downward force between the cargo and the deck, which prevents shifting. This is especially important for loads containing hazardous or valuable materials. Moreover, they can help secure large bulky loads, including mattresses, furniture, and appliances. In addition, secure anchor points help protect your cargo from damage and liability.
The D Ring tie downs from Erayco are a great option for truck bed tie-downs. They feature a high-strength steel construction that can hold up to 1,200 pounds per ring. They are available in 10 pack and are easy to install on any surface. They also come with mounting brackets.